Titanium plate

Time：2016-09-15 17:48

Titanium plate

Titanium plate there are two kinds of performance standards, GB GB/T3621-2007, GB/T13810-2007, B265, ASTM American Standard is ASTM F136, ASTM F67, AMS4928.

American Standard brands: GR1, GR2, GR3, GR5, GR7, GR12

Russian plate number: BT1-00, BT1-0, BT1-2, etc.

Domestic brands: TA0, TA2, TA3, TA5, TA6, TA7, TA9, TA10, TB2, TC1, TC2, TC3,, TC4,

Titanium plate specifications: 0.5-5.0mm x W1000mm T x L 2000-3500mmT 6.0- 30mm x W1000-2500mm x L 3000-6000mmT 30- 80mm x W1000mm x L 2000mm

Titanium plate use: metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc..

Titanium plate manufacturing process:

Forging process for hot forging above metal recrystallization temperature.

The rolling process of hot rolling at a higher temperature than the recrystallization temperature.

Cold rolling: rolling process with plastic deformation temperature below recovery temperature.

Annealing: the metal is slowly heated to a certain temperature, to maintain sufficient time, and then to the appropriate speed of cooling (usually slow cooling, and sometimes control cooling) of a metal heat treatment process.

Pickling: the workpiece is immersed in sulfuric acid and other aqueous solution to remove the metal surface of the oxide film. Is an electroplating, enamel, rolling and other processes, such as pre-treatment or intermediate treatment

Characteristics of titanium plate:

1 kinds of titanium oxide film on the surface of the plate is equivalent to a good durability with separating agent, using titanium plate saves separating agent, so the plate is easy to peel, eliminates the process of plate pretreatment, titanium plate is lighter than copper in half.

2 titanium plate life is more than 3 times of the copper plate, according to the operating conditions of up to 20 to 10 years

3 the electrolytic copper produced by the titanium board is compact, and the surface is smooth and the quality is excellent.

4 as a result of the titanium board does not need to apply the separation agent, thus can avoid the pollution of copper electrolyte.

5 increase production capacity to reduce the production cost of electrolytic copper, and thus have better economic benefits.

Previous（上一页）：Without

Next(下一页)：Without